Status > Error Statistics - NETGEAR FSM726v2 - 10/100 Mbps Managed Switch Setup Manual

700 series
Hide thumbs Also See for FSM726v2 - 10/100 Mbps Managed Switch:
Table of Contents

Advertisement

700 Series Software Manual v2.1
Outbound Discards: Transmitted and is being discarded packet
Outbound Errors: Transmitted and is an Error packet.
Ethernet Undersize Packets: Less than 64byte length packet
Ethernet Oversize Packets: more than 1518 byte length packet.
Status > Error Statistics
Figure 5-6: Error Statistics
The Error Statistics Graph allows you to chart one type of statistic for any combination of ports. In
the case of the Error Statistics Graph, the chart will present data across time so that fluctuations in
time can be easily seen.
All charts have a maximum ceiling of more than 2.1 billion (2,147,483,647). You can see the value
of each bar or line in the chart by clicking on the bar. The following will outline the settings for
each type of graph.
Statistics
Refresh Rate
Port Selection The port for data to be monitored
When all of the variables are set, click Draw.
5-8
The type of system errors to be monitored
The time interval between automatic refreshes (5,10,15, 30 seconds)
Web-Based Management Interface

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fsm726

Table of Contents