Table of Contents
Advertisement
2
Installing a PowerConnect B-MLXe-8 router
Final steps
Complete these steps in the order listed:
•
•
•
Installing a PowerConnect B-MLXe-8 router
This section describes how to install a PowerConnect B-MLXe-8 router.
NOTE
Illustrations in this chapter may differ slightly from the actual equipment.
Preparing the installation site
Before installing the router, plan the location and orientation relative to other devices and
equipment. For cooling purposes, allow a minimum of six inches of space between the sides, front,
and the back of the router and walls or other obstructions. If a router is installed in a perforated
enclosure, the perforations must cover at least 60 percent of the surface.
NOTE
This equipment is suitable for installation in a Network Telecommunication facility and where NEC
requirements apply. Additionally, it may be installed in either a Common Bonding Network (CBN) or
Isolated Bonding Network (IBN). It is not intended for Outside Plant (OSP) installations.
Ensure that the proper cabling is installed at the site.
For information on cabling, refer to
router"
network device"
Unpacking a PowerConnect B-MLXe-8 router
The PowerConnect B-MLXe-8 router ships with the following items:
•
•
•
Save the shipping carton and packing materials in case you need to move or ship the router at a
later time.
Lifting guidelines for PowerConnect B-MLXe-8 routers
Follow these guidelines for lifting and moving PowerConnect B-MLXe-8 routers:
•
40
"Attaching a management station"
"Activating the power source"
"Verifying proper operation"
on page 51,
"Attaching a management station"
on page 95.
Switch fabric modules installed in slots marked SF, and slot blanks installed in all empty
module slots.
Two AC power supplies
Insertion or extraction tool for use with RJ45 and fiber-optic connectors.
Before lifting or moving the router, disconnect all external cables.
"Installing power supplies in the PowerConnect B-MLXe-8
on page 68, and
PowerConnect B-MLXe Hardware Installation Guide
"Connecting the router to a
53-1002111-01
Advertisement
Table of Contents
