Table of Contents
Advertisement
2
Installing a PowerConnect B-MLXe-16 router
FIGURE 46
Installing power supplies in a PowerConnect B-MLXe-16 router
DANGER
High Touch Current. Earth connection is essential before connecting supply.
Power supply installation steps
Follow these steps to install a power supply in a PowerConnect B-MLXe-16 router.
1. Remove the power supply slot blank.
CAUTION
Empty power supply slots must be covered with slot blanks.
2. Remove the power supply from the packaging.
3. Insert the power supply into the slot, using the guides on either side of the slot. Refer to
66
Installing a module in a PowerConnect B-MLXe-16 router
Figure
47.
PowerConnect B-MLXe Hardware Installation Guide
53-1002111-01
Advertisement
Table of Contents
