Table of Contents
Advertisement
2
Installing a PowerConnect B-MLXe-16 router
FIGURE 38
1
4. Slide the router down so that the mounting screw heads are in the narrow portion of the
5. Tighten the screws to secure the router in place. For extra support, use additional screws.
NOTE
For better grounding of the router to the rack, attach the router using star washers. You should also
use star washers with any single-hole grounding lugs to keep the lugs from rotating.
NOTE
When making the primary ground connection, use a star washer to prevent lug rotation.
Repeat step 2 through step 5 to mount each router in the rack.
Cabinet installation steps
You can also install your device in a 4-post rack or cabinet, using a Cabinet Rack Mount Kit, which
must be ordered separately (part number 326TY). To install your router in a closed cabinet, follow
these steps.
1. Remove the sides of the cabinet to allow access to the cabinet mounting posts.
2. Remove the factory-installed mounting brackets.
3. Attach the cabinet rack mounting brackets to the front of the device. Refer to
56
Mounting the PowerConnect B-MLXe-16 router in a rack
1
Front-mount configuration
keyhole slots.
2
Mid-mount configuration
PowerConnect B-MLXe Hardware Installation Guide
2
Figure
39.
53-1002111-01
Advertisement
Table of Contents
