Table of Contents
Advertisement
4
Testing network connectivity
Syntax: ping <ip addr> | <hostname> [source <ip addr>] [count <num>] [timeout <msec>] [ttl
The maximum allowable size is 9170 bytes.
NOTE
If you send the ping to the IP broadcast address, the device lists the first four responses to the ping.
Tracing a route
To determine the path through which the router can reach another network device, enter a
command such as the following at any level of the CLI.
NetIron> traceroute 192.33.4.7
Syntax: traceroute <host-ip-addr> [maxttl <value>] [minttl <value>] [numeric] [timeout <value>]
The CLI displays traceroute information for each hop on the route as soon as the information is
received. Traceroute requests display all responses to a given TTL. If there are multiple equal-cost
routes to the destination, the router displays up to three responses by default.
98
<num>] [size <byte>] [quiet] [numeric] [no-fragment] [verify] [data <1-to-4 byte hex>]
[brief]
[source-ip <ip addr>]
PowerConnect B-MLXe Hardware Installation Guide
53-1002111-01
Advertisement
Table of Contents
