Dell PowerConnect B - MLXe 4 Hardware Installation Manual page 210

Hardware installation guide
Table of Contents

Advertisement

B
Dangers
DANGER
GEFAHR
DANGER
PELIGRO
DANGER
GEFAHR
DANGER
PELIGRO
198
To prevent damage to the chassis and components, never attempt to lift the chassis using
the fan or power supply handles. These handles were not designed to support the weight of
the chassis.
Alle Geräte mit Wechselstromquellen sind nur zur Installation in Sperrbereichen bestimmt.
Ein Sperrbereich ist ein Ort, zu dem nur Wartungspersonal mit einem Spezialwerkzeug,
Schloss und Schlüssel oder einer anderen Schutzvorrichtung Zugang hat.
Pour éviter d'endommager le châssis et les composants, ne jamais tenter de soulever le
châssis par les poignées du ventilateur ou de l'alimentation. Ces poignées n'ont pas été
conçues pour supporter le poids du châssis.
Para prevenir daños al chasis y a los componentes, nunca intente levantar el chasis
usando las asas de la fuente de alimentación o del ventilador. Tales asas no han sido
diseñadas para soportar el peso del chasis.
The ports labeled BITS1, BITS2 are safety extra low voltage (SELV) circuits. SELV circuits
should only be connected to other SELV circuits. All interconnected equipment should be
located in the same building as the unit.
Die Anschlüsse BITS1, BITS2 sind SELV (Safety Extra Low Voltage)- Stromkreise.
SELV-Stromkreise sollten nur an andere SELV-Stromkreise angeschlossen werden. Alle mit
einander verbundenen Geräte sollten sich im gleichen Gebäude wie die Einheit befinden.
Les ports marqués BITS1, BITS2 sont des circuits de sécurité à très basse tension (SELV).
Ces circuits doivent uniquement être connectés à d'autres circuits SELV. Tous les
équipements interconnectés via ces ports doivent se trouver dans le même bâtiment que
l'unité.
Los puertos que llevan las marcas BITS1, BITS2 son circuitos de bajo voltaje de seguridad
extra (SELV, por sus siglas en inglés). Los circuitos SELV sólo deben conectarse a otros
circuitos SELV. Todos los equipos interconectados deben estar situados en el mismo
edificio que la unidad.
PowerConnect B-MLXe Hardware Installation Guide
53-1002111-01

Advertisement

Table of Contents
loading

This manual is also suitable for:

Powerconnect b - mlxe 8

Table of Contents