Dell PowerConnect B - MLXe 4 Hardware Installation Manual page 154

6
Displaying image versions
TABLE 28
Field
Startup Configuration
Boot Flash
Boot Image
Interface modules
Line Card Slot <number>
Code Flash
IronWare Image (Primary or
Secondary)
Monitor Image
Boot Flash
142
Description of the show flash command output (Continued)
Definition
The output displays the following information about the startup
configuration, which is saved in the management module flash memory:
•
•
•
The model number and size of the management module boot flash.
Indicates the boot image installed in the management module boot
flash. The image must be xmprm <xxxxx>. The output displays the
following information about the image:
•
•
•
•
The interface module for which flash information is displayed.
The <number> parameter indicates the number of the chassis slot, 1 –
16, in which the interface module is installed.
The model number and size of the interface module flash memory.
Indicates the IronWare image installed in the primary or secondary
location in the interface module flash memory. The image must be xmlp
<xxxxx>. The output displays the following information about the image:
•
•
•
•
Indicates the monitor image installed in the interface module flash
memory. The image must be xmlb <xxxxx>. The output displays the
following information about the image:
•
•
•
•
The model number and size of the interface module boot flash.
Size – Size, in bytes, of the startup configuration.
Check sum – A unique ID for the file. If the contents of the file
change, the check sum changes also.
Modification date and time – Date and time that the startup
configuration was last saved.
Version – "5.1.0Txxy" indicates the image version number. "xx"
indicates the hardware type; "y" indicates the image type.
Size – The size, in bytes, of the image.
Check sum – A unique ID for the image. If the contents of the image
change, the check sum changes also.
Compilation date and time – The date and time that the image was
compiled.
Version – "5.1.0Txxy" indicates the image version number. "xx"
indicates the hardware type; "y" indicates the image type.
Size – The size, in bytes, of the image.
Check sum – A unique ID for the image. If the contents of the image
change, the check sum changes also.
Compilation date and time – The date and time that the image was
compiled.
Version – "5.1.0Txxy" indicates the image version number. "xx"
indicates the hardware type; "y" indicates the image type.
Size – The size, in bytes, of the image.
Check sum – A unique ID for the image. If the contents of the image
change, the check sum changes also.
Compilation date and time – The date and time that the image was
compiled.
PowerConnect B-MLXe Hardware Installation Guide
53-1002111-01