Table of Contents
Advertisement
2
Installing a PowerConnect B-MLXe-8 router
1. Remove the power supply slot blank.
2. Remove the power supply from the packaging.
3. Insert the power supply into the slot and slide it along the guides on each side of the slot. Refer
NOTE
Empty power supply slots must be covered with slot blanks.
CAUTION
Carefully follow the mechanical guides on each side of the power supply slot and make sure the
power supply is properly inserted in the guides. Never insert the power supply upside down.
FIGURE 36
4. Push the power supply front panel into the router until it engages the backplane connector.
5. Ensure the captive pin is engaged.
For information about connecting power to the router, refer to
Connecting AC power
AC power is supplied through the power cord that is connected to the AC power supply in the router.
52
to
Figure
36.
Installing a power supply in a PowerConnect B-MLXe-8 router
"Connecting AC power"
PowerConnect B-MLXe Hardware Installation Guide
on page 52.
53-1002111-01
Advertisement
Table of Contents
