Configuring The Server; Server Registration - Compaq ML350 - ProLiant - G2 Setup And Installation Manual

Configuring the Server

The server setup utility, RBSU, can be used to configure the server and
options. To initiate RBSU, press the F9 key when prompted during start up.
The SmartStart CD contains ROMPaq and updated drivers, and assists with
operating system installation. To use the SmartStart CD:
1. Locate the SmartStart CD in the Server Setup and Management pack.
2. After you power up the server, press the CD-ROM drive eject button.
3. Insert the SmartStart CD into the CD-ROM drive with the labeled side
up. Handle the CD by its edges, not by the flat surfaces of the disc.
Figure 2-3. Inserting a CD into the CD-ROM drive
4. After the server boots to the CD, the SmartStart sequence begins. Refer
to the SmartStart CD for more information.

Server Registration

For server registration information, refer to the Server Setup and Management
pack shipped with the server, or visit the Compaq website:
www.compaq.com/register
Overview of Server Installation 2-11