Compaq ML350 - ProLiant - G2 Setup And Installation Manual page 97

5-6 Compaq ProLiant ML350 Generation 2 Server Setup and Installation Guide
Server Asset Text
The Server Asset Text menu customizes the system-specific text for the
server, including the following:
I
Set Server Information Text defines reference information for the
server, such as Server Name, Server Asset Tag, Server Primary OS,
and Other Text.
I
Set Administrator Information Text defines reference information for
the server administrator, such as Admin Name Text, Admin Phone
Number Text, Admin Pager Number Text, and Other Text.
I
Set Service Contact Text defines reference information for the service
contact of the server, such as Service Name Text, Service Phone
Number Text, Service Pager Number Text, and Other Text.
I
Serial Number allows the user to change the chassis serial number.
Advanced Options
The Advanced Options menu is used to configure advanced options of the
system. The following is a list of selections found in this menu with an
explanation of each option:
I
MPS Table Mode allows the user to change the advanced
programmable interrupt controller (APIC) table setting. This selection
should be automatically set by OS Selection, but it allows the user to
override the automatic selection.
NOTE: The latest operating systems from Microsoft, Novell, and SCO bypass the use of
IRQs and use an APIC. The APIC has been designed to address the issues associated with
limited IRQs, multiprocessor systems, and shared interrupts. If you are using the latest
operating system, you can let the system automatically configure interrupts for all devices
in the system.
I
POST Speed Up allows the user to enable or disable the quick or slow
start process. The slow start process performs a complete memory test.
I
F1 Prompt configures the server to require the user to press the F1 key
to proceed during power up when an error is encountered during the
power-up sequence.