1. Manuals
  2. Brands
  3. Compaq Manuals
  4. Server
  5. ML350 - ProLiant - G2
  6. User manual

Compaq ProLiant ML350 User Manual

Hide thumbs Also See for ProLiant ML350:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Troubleshooting Manual, Maintenance and Service Manual
Compaq ProLiant
Description
nd
The 2
generation ProLiant ML350 server is a dual processor capable,
expandable server that comes in both non-hot-plug and hot-plug hard drive
models. New features of this server include the latest 1-GHz processor, an
integrated dual channel Wide Ultra3 SCSI controller, additional 64-bit PCI
slots and support for USB ports. The server also has a new bezel, variable fan
control, a built-in connector for Remote Insight Board Lights Out Edition ,
ROM-based BIOS setup and Remote ROM Flash support.
Note
The system uses the FC-PGA (flip-chip) processor which has a different socket
than the previous generation ProLiant ML350 and therefore cannot be used to
upgrade previous generation systems.
New Models
The following table provides the part numbers and configuration codes for the
updated ProLiant ML350.
Table 1: Part Numbers and Configuration Codes
ProLiant ML350T02 P1000-256KB 128MB HP
ProLiant ML350T02 P1000-256KB 128MB NHP
ProLiant ML350T02 P1000-256KB 128MB 9.1GB NHP

New Features

This model brings the following changes to the ProLiant ML350 Pentium III
line:
1-GHz FCPGA (Flip-Chip) Intel Pentium III (Coppermine) with 256KB
n
integrated Level 2 cache
Four 64-bit (33MHz) PCI slots (vs. two in 1
n
ISA slot (vs. one in 1
Support for 4MB memory
n
Two USB ports
n
Internal Remote Insight Lights-Out connector
n
Adaptec 7899 integrated dual channel Wide Ultra3 SCSI controller (vs.
n
Ultra2 in 1
Support for Compaq RAID LC2 (Zorro)
n
ATI Rage XL, 4MB SDRAM Video Memory
n
ROM-based BIOS setup and Remote ROM Flash support
n
Rev. 0.41
ML350 Server Overview
Server Model
st
generation)
st
generation)
Compaq ProLiant ML350
Part Number
Configuration
Code
195471-xx1
FSJ1
160247-xx1
FSH1
160247-xx2
FSH2
st
generation) but no legacy
1 of 13

Advertisement

Table of Contents
loading

Related Manuals for Compaq ProLiant ML350

Summary of Contents for Compaq ProLiant ML350

  • Page 1: New Features

    ROM-based BIOS setup and Remote ROM Flash support. Note The system uses the FC-PGA (flip-chip) processor which has a different socket than the previous generation ProLiant ML350 and therefore cannot be used to upgrade previous generation systems. New Models The following table provides the part numbers and configuration codes for the updated ProLiant ML350.
  • Page 2 Compaq SmartStart 4.90 and Compaq Insight Manager 4.90 Intelligent (variable) fan control Streamlines ID bezel Figure 1 illustrates the new features on the ProLiant ML350 server feature board: Figure 1: Feature Board ATI Rage XL 4MB Adaptec 7899 Dual Channel...

  • Page 3: Upgrade Options

    Compaq ProLiant ML350 Upgrade Options Table 2 lists unique option kits that compatible with both 1 and 2 generation ProLiant ML350’s. Table 3 lists new and newly supported recommended options. Table 2: Unique Option Part Numbers Option Part Number Installation Guide...
  • Page 4 Note The processor option kit is for the FC-PGA (flip-chip) processor which has a different socket than the previous generation ProLiant ML350 and therefore cannot be used to upgrade previous generation systems. 4 of 13...
  • Page 5 Compaq ProLiant ML350 Locating the Processor or Processor Power Module Figure 3: Processor Locations In the Figure 3 you can see the locations of the processor modules and processor power modules (PPMs). They are numbered as follows: 1. Processor socket 1 2.
  • Page 6 Compaq ProLiant ML350 Figure 5: Processor Removal To remove the old processor module: 1. Lift up the lever on the processor socket (1). 2. Remove the processor from the socket (2). Figure 6: Processor Replacement To install the new processor module: 1.
  • Page 7 Compaq ProLiant ML350 Figure 8: Heatsink Replacement To install the new heatsink: 1. Place the heatsink (1) onto the processor. 2. Secure the heatsink retainer clip to the hook on the processor socket (3). 3. Secure the opposite side of the heatsink retainer clip (2) to the hook on the opposite side of the socket.

  • Page 8: Service Considerations

    Compaq ProLiant ML350 Removing and Replacing System Fan 2 Figure 11: System Fan 2 Location Figure 12: System Fan 2 Connection A new feature of the ProLiant ML350 is the a second system fan on the center wall. It is...
  • Page 9 RBSU replaces BIOS Setup and provides a simplified setup process that is machine-specific and tailored for each type of server. RBSU Version 1.0 on the ProLiant ML350 is intended to facilitate transition to the “look and feel” of RBSU Version 2.0 which will be available on future products.

  • Page 10: Starting And Exiting Rbsu

    Primary boot controller Date and time Note To bypass this step you must insert a Compaq Diagnostics ROMpaq diskette into the floppy drive before booting the server. This would enable you to upgrade the ROM or run the SmartStart scripting tools.

  • Page 11: Rbsu Main Menu

    Compaq ProLiant ML350 RBSU Main Menu The main menu selects which configuration setting to view or modify. From the main menu some selections bring you directly to configuration functions while others lead to sub menus that expand the available choices.
  • Page 12 More detail on these settings can be found in the ROM Based Setup Utility User Guide and the Compaq ProLiant ML350 Setup and Installation Guide.
  • Page 13 Compaq ProLiant ML350 RBSU Date and Time Settings The final requirement on initial boot is to set the system Date and Time. This is one of the selections on the main menu. 13 of 13 Rev. 0.41...

Table of Contents