Compaq ML350 - ProLiant - G2 Setup And Installation Manual page 72

9. Lift the heatsink retaining clip over the rear edge of the socket and hook
underneath the socket tabs.
Figure 3-31. Seating the processor clip on the rear of the socket
10. Clasp the front of the assembly clip over the front edge of the socket
11. Press the assembly clip down to secure the heatsink and processor
assembly in the socket
CAUTION: Applying too much pressure on the assembly clip lever could cause
it to break. Use care when performing this step.
2
Figure 3-32. Securing the processor and heatsink assembly on the front of
the socket
.
Hardware Options Installation 3-33
1
.