System Configuration Switch Settings - Compaq ML350 - ProLiant - G2 Setup And Installation Manual

E-8 Compaq ProLiant ML350 Generation 2 Server Setup and Installation Guide

System Configuration Switch Settings

The ProLiant ML350 Generation 2 server contains one switchbank. This
section explains the use of each reserved and nonreserved switch.
Figure E-4. System configuration switch
System Configuration Switch Settings
Position Default
1 Off
2 Off
3 Off
4 Off
5 Off
6 Off
7 Off
8 Off
Note: Switch positions 7 and 8 are reserved for Compaq authorized
service providers only. Do not change the specified default setting for
these positions, unless instructed otherwise.
Table E-4
Function/Description
Video disable
Lock configuration
Tower/Rack configuration
Enable diskette boot
Password disable
Clear CMOS/NVRAM
Reserved
Reserved