Configuring The Server - Compaq ProLiant 400 Setup And Installation Manual

Configuring the Server

The BIOS Setup Utility can be used to configure the server and options. To
invoke the setup utility, press the F10
process.
The SmartStart and Support Software CD contains the ROMPaq and updated
drivers, and assists with the operating system installation. To use the
SmartStart and Support Software CD:
1. Locate the SmartStart and Support Software CD in the Server Setup and
Management pack.
2. With your server powered up, press the CD-ROM drive eject button.
3. Insert the SmartStart and Support Software CD in the CD-ROM drive
with the labeled side up. Handle the CD by its edges, not by the flat
surfaces of the disc.
Figure 2-3. Inserting the CD
4. When the busy indicator turns green, the SmartStart sequence begins.
Refer to the SmartStart and Support Software CD for more information.
Overview of Server Installation 2-7
F10 F10 key when prompted during the startup F10