Compaq ML350 - ProLiant - G2 Setup And Installation Manual page 88

4-8 Compaq ProLiant ML350 Generation 2 Server Setup and Installation Guide
3. Remove the SCSI cable from the SCSI channel A connector on the
system board.
4. Reconnect the SCSI cable to either the SCSI controller option or Smart
Array Controller.
Figure 4-6. Connecting a SCSI cable to a SCSI controller option or Smart
Array Controller
NOTE: Both SCSI channels on the Server Feature Board are self-terminating. If you
choose to not use one or both of the SCSI channels, you do not need to terminate the
unused channel(s).