Installing The Rack Server; Tower-To-Rack Option - Compaq ML350 - ProLiant - G2 Setup And Installation Manual

Installing the Rack Server

The ProLiant ML350 Generation 2 server is also available in a rack model,
immediately ready for installation. A rack conversion option kit is also
available for customers who want to convert a tower ProLiant ML350
Generation 2 server to a rack server. This section provides environmental
information required for the installation of a rack-mounted server.

Tower-to-Rack Option

Figure 2-1 shows the ProLiant ML350 Generation 2 server installed in a rack
configuration.
Figure 2-1. The ProLiant ML350 Generation 2 server installed in a rack
To purchase the rack conversion kit (Part Number 237045-B21), contact your
local Compaq authorized reseller or order direct from Compaq.
A selection of racks for your server can be purchased through your Compaq
authorized reseller or direct from Compaq at
www.compaq.com/storage/
Overview of Server Installation 2-3