Compaq ML350 - ProLiant - G2 Setup And Installation Manual page 38

2-10 Compaq ProLiant ML350 Generation 2 Server Setup and Installation Guide
5. Power up your server by pressing the power button on the front of the
server.
6. Configure your server. See "Configuring the Server" later in this chapter
for instructions.
7. Install the operating system.
8. Install Compaq Insight Manager to manage the server. For Compaq
Management CD initialization procedures, refer to the Server Setup and
Management pack shipped with your server.
IMPORTANT: You must install and use Compaq Insight Manager to benefit from the
Compaq Pre-Failure Warranties on processors, hard drives, and memory modules.
9. Install any application software needed.
10. Register your server. See "Server Registration" later in this chapter for
details.