Grounding Methods - Compaq ML350 - ProLiant - G2 Setup And Installation Manual

Compaq proliant ml350 generation 2 server setup and installation guide
Hide thumbs Also See for ML350 - ProLiant - G2:
Table of Contents

Advertisement

B-2 Compaq ProLiant ML350 Generation 2 Server Setup and Installation Guide

Grounding Methods

There are several methods for grounding. Use one or more of the following
methods when handling or installing electrostatic-sensitive parts:
I
Use a wrist strap connected by a ground cord to a grounded (earthed)
workstation or computer chassis. Wrist straps are flexible straps with a
minimum of 1 megohm ± 10 percent resistance in the ground cords. To
provide proper grounding, wear the strap snug against the skin.
I
Use heel straps, toe straps, or boot straps at standing workstations. Wear
the straps on both feet when standing on conductive floors or dissipating
floor mats.
I
Use conductive field service tools.
I
Use a portable field service kit with a folding static-dissipating
work mat.
If you do not have any of the suggested equipment for proper grounding, have
a Compaq authorized reseller install the part.
NOTE: For more information on static electricity, or assistance with product installation,
contact your Compaq authorized reseller.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Proliant ml350 g2

Table of Contents