System Settings - Dell 3130cn - Color Laser Printer User Manual

Printer Maintenance
The Printer Maintenance tab includes the System Settings, Paper Density, Registration Adjustment, Adjust
Altitude, Reset Defaults, Non-Dell Toner, Initialize PrintMeter, Tray Setting, TCP/IP Settings, and Network
Settings pages.
NOTE: Values marked by an asterisk (*) are the factory default menu settings.

System Settings

Purpose:
To Use these settings to configure the printer's power management, warning tones, time-out time, operator panel
language setting, job log auto print, position of the Print ID, setting of the dump print, setting of the additional memory,
setting of the substitute sheet, mm/inch setting, and duplex print settings.
Values:
5-60 Min.
Power Saver
Timer Mode 1*1
5 Min.*
1-6 Min.
Power Saver
Timer Mode 2*1
6 Min*
Control Panel
Tone
Invalid Key
Tone
Machine
Ready Tone
Job Complete
Tone
Fault Tone
Audio Tones
Alert Tone
Out of Paper
Alert Tone
Low Toner
Alert Tone
Base Tone
0
Fault Time-Out 3-300 sec
60 sec*
0
Time-Out 5-300 sec
30 sec*
English*
Specifies the time before the printer enters the power saver timer mode
1(sleep mode) after it finishes a job.
Specifies the time before the printer enters the power saver timer mode 2
(deep sleep mode) after it finishes a job.
Off* Does not emit a tone when the operator panel input is correct.
On Emits a tone when the operator panel input is correct.
Off* Does not emit a tone when the operator panel input is incorrect.
On Emits a tone when the operator panel input is incorrect.
Off* Does not emit a tone when the printer becomes ready.
On Emits a tone when the printer becomes ready.
Off* Does not emit a tone when a job is complete.
On Emits a tone when a job is complete.
Off* Does not emit a tone when a job ends abnormally.
On Emits a tone when a job ends abnormally.
Off* Does not emit a tone when a problem occurs.
On Emits a tone when a problem occurs.
Off* Does not emit a tone when the printer runs out of paper.
On Emits a tone when the printer runs out of paper.
Off* Does not emit a tone when toner or some other consumable is low.
On Emits a tone when toner or some other consumable is low.
Does not emit a tone when the operator panel display is returned to the
Off*
default settings by scrolling the loop menu.
Emits a tone when the operator panel display is returned to the default
On
settings by scrolling the loop menu.
Disables the fault time-out.
Specifies the amount of time the printer cancels for a job stops
abnormally.
Disables the job time-out.
Specifies the amount of time before the printer cancels for jobs that stop
abnormally.