Dell 3130cn - Color Laser Printer User Manual page 37

1
DNS Dynamic Update (IPv6)*
1
Auto Generate Search List*
1
Search Domain Name*
1
Time-out*
Priority to IPv6 DNS Name
Resolution
WINS Mode
WINS Primary Server
1
WINS*
WINS Secondary Server
Connection Time-Out
LPD
IP Filter (IPv4)
Port Number
Port9100 Connection Time-Out
IP Filter (IPv4)
Printer URI
Connection Time-Out
1
IPP*
Port Number
Maximum Sessions
Port Number
Receive Time-Out
WSD Notification Time-Out
Maximum Number of TTL
Maximum Number of Notification
Port Number
HTTP Simultaneous Connections
Connection Time-Out
Address
Address Mask
IP Filter
2
(IPv4)*
Active Mode
1
* An optional network protocol adapter is required to display the item.
2
* This item is only available for LPD or Port9100.
To configure the IP Filter feature, enter an IP address to be filtered in the Address field and the Subnet Mask in the Address Mask field. Enter a numeric value between 0 and 255 in each field. "*" is appended to the current value.
Setup Procedure
You can set up to a maximum of five items and the first item takes priority. Enter the shortest address first before proceeding to the next longer address when setting multiple filters.
The following section explains how the IP Filter (IPv4) operates.
1. IP Filter Procedure
a. Enabling Printing From a Specified User
The following describes the procedure to enable printing only from the "192.168.100.10" IP address.
Procedures:
i. Click the first column of Access List row 1.
ii. Enter "192.168.100.10" in the Address field and "255.255.255.255" in the Address Mask field.
iii. Select Permit.
iv. Click Apply New Settings.
b. Disabling Printing From a Specified User
Select the check box to enable dynamic updates to DNS.
Select the check box to automatically generate the search list.
Specifies the search domain name. Up to 255 alphanumeric characters, periods, and hyphens can be used. If you need to specify more than one domain name, separate them using a comma or
semicolon.
Specifies the time-out period between 1 and 60 seconds.
Select the check box to enable the DNS Name Resolution feature.
Select the check box to get the WINS server address automatically from the DHCP server.
Sets WINS server address in the nnn.nnn.nnn.nnn format. Each section of nnn.nnn.nnn.nnn is a value between 0 and 254. Note that values 127 and 224 to 254 are not valid for the first three-digits.
Sets a back up WINS server address in the nnn.nnn.nnn.nnn format. Each section of nnn.nnn.nnn.nnn is a value between 0 and 254. Note that values 127 and 224 to 254 are not valid for the first
three-digits.
Sets the connection timeout period from 1 to 1000 seconds.
To set the IP Filter settings, click IP Filter (IPv4). The IP Filter (IPv4) page is displayed.
Sets the port number from 9000 to 9999.
Sets the connection timeout period between 1 and 1000 seconds.
To set the IP Filter settings, click IP Filter (IPv4). The IP Filter (IPv4) page is displayed.
Displays the printer URI.
Sets the connection timeout period from 1 to 1000 seconds.
Displays the port number for receiving requests from the client.
Displays the maximum number of connections received simultaneously by the client.
Sets the port number from 8000 to 9999.
Sets the receive timeout period from 1 to 65535 seconds.
Sets the notification timeout period from 1 to 60 seconds.
Sets the maximum number of TTL from 1 to 10.
Sets the maximum number of notifications from 10 to 20.
Sets the port number to 80 or from 8000 to 9999.
Displays the maximum number of connections received simultaneously by the client.
Sets the connection timeout period from 1 to 255 seconds.
Sets the address in the address field. Enter a numeric value between 0 and 255 in each field of "aaa.bbb.ccc.ddd." However, 127 and 224 to 254 cannot be used to "aaa."
Sets the Subnet Mask in the Mask field. Enter a numeric value between 0 and 255 in each field.
Reject Rejects printing from specified network address.
Permit Permits printing from specified network address.
Disabled Disables the IP Filter feature for the specified IP address.