Ensure that the margins are set correctly on the application being used.
1
Is the problem recovered?
The color registration is out of alignment.
Action
Execute auto color registration adjustment.
1. Launch the Tool Box, and click Registration Adjustment on the Printer
1
Maintenance tab.
2. Click Auto Correct under Color Registration Adjustments.
Is the problem recovered?
Replace the print cartridge. See
2a
Is the problem recovered?
Print the Color Regi Configuration Chart and manually correct the color registration.
1. On the Registration Adjustment page, click the Color Regi Chart button.
The Color Regi Configuration Chart is printed.
2. Identify the offset values from the chart and enter them in Enter Number. See
2b
"Adjusting Color Registration"
3. Click the Apply New Settings button.
4. Click the Color Regi Chart button to print the Color Regi Configuration Chart
again.
Is the problem recovered?
Misfeed jam
Action
Ensure that the tray 1 is properly inserted.
1
Is the problem recovered?
Use Thick paper that is 216 gsm or less.
2a
Is the problem recovered?
Use Thin paper that is 216 gsm or less.
2b
Is the problem recovered?
Load Coated paper one sheet at a time.
"Installing the Print
Cartridges".
for details.
Yes
The task is
complete.
The task is
complete.
The task is
complete.
The task is complete. Contact Dell.
No
Proceed to the action corresponding to the type of
the print media being used:
Thick - 2a
Thin - 2b
Coated - 2c
If performing duplex printing, go to action 2d.
If using paper other than the above or if not
performing duplex printing, go to action 2e.
Go to action 3a.
Go to action 3a.
Yes
No
The task is
Go to
complete.
action 2.
The task is
Contact
complete.
Dell.
The task is
Contact
complete.
Dell.