Dell 3130cn - Color Laser Printer User Manual page 118

French
Italian
German
Panel Language Spanish
Dutch
Danish
Norwegian
Swedish
Off*
Auto Log Print
On
Off*
Top Left
Print ID Top Right
Bottom Left
Bottom Right
Off
Print Text
On*
Off*
Front
Banner Sheet
Insert Position
Back
Front & Back
Tray 1*
Banner Sheet
Tray 2*
Specify Tray
MPF
Disable
RAM Disk*3
50-500MB*
50-1000MB*
1 Sided*
Odd Page 2 Sided
2 Sided
Off*
Larger Size
Substitute Tray
Nearest Size
MPF Feed
millimeter (mm)*
mm/inch
inch (")*
Apply New Settings
Restart printer to apply new settings
*1 Enter 5 to put the printer in the power saver timer mode five minutes after it finishes a job. This uses much less
energy, but requires more warm-up time for the printer. Enter 5if your printer shares an electrical circuit with room
lighting and you notice lights flickering.
Select a high value if your printer is in constant use. Under most circumstances, this keeps the printer ready to operate
Specifies the language to be used on the operator panel.
Does not automatically output a log of completed jobs from the printer.
Outputs a log of completed jobs from the printer automatically.
Does not print the user ID.
Prints the user ID on the specified location.
Does not print the received PDL data as text data.
Prints the received PDL data as text data.
Does not insert the banner sheet.
Inserts the banner sheet to the specified position.
2
Specifies the input tray to insert the banner sheet.
Does not allocate RAM for the disk file system. Secure Print, and Proof
Print jobs will abort and be recorded to the job log.
4
Allocates RAM for the disk file system automatically.
5
Prints the odd last page upside down to the paper
Prints the odd last page in normal direction to the paper
No tray size substitute accepted.
Substitutes paper of next largest size. When there is no larger paper size,
the printer substitutes paper of nearest size.
Substitutes paper of nearest size.
Substitutes paper in the MPF.
Selects millimeter or inch as the default measurement unit.
6
After you complete the settings, press the Apply New Settings button to
apply the changes.
Press the Restart printer to apply new settings button to apply the
changes.