Back to Contents Page
Understanding the Tool Box Menus
Printer Settings Report
Printer Maintenance
Diagnosis
The Tool Box allows you to view or specify the printer settings. You can also diagnose the printer settings by using the
Tool Box.
The Tool Box consists of the Printer Settings Report, Printer Maintenance, and Diagnosis tabs.
NOTE:
A Password dialog box appears the first time you try to change settings on ToolBox when Panel Lock is
set on the printer. In this case, input the password you specified, and click OK to apply the settings.
Printer Settings Report
The Printer Settings Report tab includes the Printer Information, Menu Settings, Reports, Network Settings, and
TCP/IP Settings pages.
NOTE:
Values marked by an asterisk (*) are the factory default menu settings.
Printer Information
Purpose:
To display the printer's system information.
Values:
Dell Service Tag Number
Printer Serial Number
Printer Type
Asset Tag Number
Memory Capacity
Processor Speed
Firmware Version
Network Firmware Version
MCU Firmware Version
Printing Speed (Color)
Printing Speed (Monochrome) Displays the speed for monochrome printing.
Menu Settings
Purpose:
To display the printer's menu settings.
Values:
Power Saver
Timer Mode 1
Power Saver
Displays Dell's service tag number.
Displays the printer's serial number.
Displays the type of printing for the printer. Color Laser is displayed normally.
Displays the printer's asset tag number.
Displays the memory capacity.
Displays the processing speed.
Displays the version of the controller.
Displays the NIC version.
Displays the version of the MCU firmware.
Displays the speed for color printing.
Displays the amount of time before the printer enters the power saver timer mode 1
after it finishes a job.
Displays the amount of time before the printer enters the power saver timer mode 2