Dell 3130cn - Color Laser Printer User Manual page 123

MPF Paper Size
MPF Custom Size - Y
MPF Custom Size - X
Apply New Settings
Restart printer to
apply new settings
*1 This item is only available when the optional 550 sheet feeder is installed.
TCP/IP Settings
Purpose:
To configure TCP/IP settings.
Values:
Automatically sets the IP address.
AutoIP*
A random value in the range of 169.254.1.0 to 169.254.254.255 that is not currently in use on the
network is set as the IP address. The subnet mask is set as 255.255.0.0.
IP
DHCP Sets the IP address using DHCP.
Address
BOOTP Sets the IP address using BOOTP.
Mode
RARP Sets the IP address using RARP.
Manually
Manually sets the IP address.
Set
Manually sets the IP address allocated to the printer.
It is allocated to the printer using the format nnn.nnn.nnn.nnn. Each octet that makes up
IP Address
nnn.nnn.nnn.nnn is a value in the range of 0 to 254. 127 and any value in the range of 224 to 254
cannot be specified for the first octet of a gateway address.
Foilo (8.5 x 13")
Legal (8.5 x 14")
Executive (7.25
x 10.5")
Monarch (3.875
x 7.5")
DL (110 x 220
mm) Specifies the size of paper loaded in the MPF.
C5 (162 x 229
mm)
Envelope #10
(4.125 x 9.5")
Postcard JPN
Youkei 2 (114 x
162 mm)
Youkei 3 (98 x
148 mm)
Youkei 4 (105 x
235 mm)
Youchoukei 3
(120 x 235 mm)
Choukei 3 (120 x
235 mm)
Custom Size
Specifies the length of custom size paper loaded in the MPF. The available range is from 127
mm (5.0 in.) to 355 mm (14.0 in.).
Specifies the width of custom size paper loaded in the MPF. The available range is from 77 mm
(3.0 in.) to 220 mm (8.7 in.).
After you complete the settings, press the Apply New Settings button to apply the changes.
Press the Restart printer to apply new settings button to apply the changes.