Dell 3130cn - Color Laser Printer User Manual page 144

Purpose:
To specify whether to perform the image enhancement feature. Image enhancement is a feature that makes the boundary
line between black and white smoother to decrease jagged edges and enhance the visual appearance.
Values:
On* Enables the Image Enhancement feature.
Off Disables the Image Enhancement feature.
Hex Dump
Purpose:
To help isolate the source of a print job problem. With Hex Dump selected, all data sent to the printer is printed in
hexadecimal and character representation. Control codes are not executed.
Values:
Disable* Disables the Hex Dump feature.
Enable Enables the Hex Dump feature.
Draft Mode
Purpose:
To save toner by printing in the draft mode. The print quality is reduced when printing in the draft mode.
Values:
Disable* Does not print in the draft mode.
Enable Prints in the draft mode.
LineTermination
Purpose:
To add the line termination commands.
Values:
The line termination command is not added.
Off*
CR=CR, LF=LF, FF=FF
The LF command is added.
Add-LF
CR=CR-LF, LF=LF, FF=FF
The CR command is added.
Add-CR
CR=CR, LF=CR-LF, FF=CR-FF
The CR and LF commands are added.
CR-XX
CR=CR-LF, LF=CR-LF, FF=CR-FF
Default Color
Purpose:
To specify the color mode to Color or Black. This setting is used for a print job which does not specify a print mode.
Value: