Dell 3130cn - Color Laser Printer User Manual page 270

EX
Feed paper from the tray loaded with Executive (7.25 x 10.5 inches).
MO
Feed paper from the tray loaded with Monarch (3.875 x 7.5 inches).
COM10
Feed paper from the tray loaded with Envelope #10 (4.125 x 9.5 inches).
DL
Feed paper from the tray loaded with DL (110 x 220 mm).
C5
Feed paper from the tray loaded with C5 (162 x 229 mm).
PC
Feed paper from the tray loaded with Japanese Postcard (100 x 148 mm).
Y2
Feed paper from the tray loaded with Youkei 2 (114 x 162 mm).
Y3
Feed paper from the tray loaded with Youkei 3 (98 x 148 mm).
Y4
Feed paper from the tray loaded with Youkei 4 (105 x 235 mm).
YT3
Feed paper from the tray loaded with Youchoukei 3 (120 x 235 mm).
MxNmm
Feed paper from the tray loaded with MxNmm defined by users.
Possible range specified:
Width: 76.2 to 220.0 mm
Length: 127.0 to 355.6 mm
MxNin
Feed paper from the tray loaded with MxN inches defined by users.
Possible range specified:
Width: 3.00 to 8.66 inches
Length: 5.00 to 14.0 inches
If this option is not specified or the tray specified is not available, feed paper from the default tray.
-t
Turns on the save toner mode for printing. The print result will be fainter than that of normal printing. In some
cases, this option will be ignored.
-r
Rotates the image by 90° and uses the paper in the landscape orientation.
-n
Disables the addition of the showpage. It is used when files converted to the PostScript language program are
merged with files created with other applications.
-l=left,bottom
Specifies the print position. Printing will be executed from the left and bottom of the page. The default is 0.25
inches for both left and bottom.
-s=width,height
Specifies the output size. Printing will be executed with the width and height in inches.
-S=width
Sets the width of the output size in inches. The height will be calculated automatically according to the width.