Dell 3130cn - Color Laser Printer User Manual page 34

PFS
Remote peers IPv4 address
Remote peers IPv6 address
Non IPsec communication policy
Enable IEEE 802.1x
*1*3
802.1x
Authentication Method
5 Access List
IP Filter (IPv4)*
1
* This settings are not displayed when the optional wireless printer adapter is installed.
2
* An optional wireless printer adapter is required to display the item.
3
* An optional network protocol adapter is required to display the item.
4
* This item is only available when using IPv6 dual mode.
5
* This item is only available for LPD or Port9100.
NetWare Setup Page
Purpose:
To verify the current settings of IPX/SPX and Netware. In this page, you can only verify the settings of items. If you want to change the settings, go to the pages in the Print Server Settings tab.
Values:
Frame Type Displays the active frame type.
IPX/SPX Settings Current Frame Type Displays the current frame type.
Network Address Displays the IPX network address.
Port Status Displays the port status. When NetWare is implemented, the status of IPX/SPX and TCP/IP is also displayed.
Device Name Displays the printer name.
Active Mode Displays the current mode for Active Mode.
Tree Name Displays the tree name.
NetWare Context Name Displays the context name of the Print Server Object.
File Server Name Displays the file server name.
Polling Interval Displays the time interval.
NCP Packet Burst Displays the status, and whether to use NCP packet burst.
Status Information Displays messages according to the conditions of the printer.
SLP Active Discovery Displays whether active discovery is enabled.
NOTE: An optional network protocol adapter is required to display the NetWare Setup page.
E-Mail Alert Setup Page
Purpose:
To verify the current settings of SMTP/POP (Simple Mail Transfer Protocol/Post Office Protocol) used for the e-mail feature and E-Mail Alerts feature. In this page, you can only verify the settings of items. If you want to change the settings, go to the pages in
the Print Server Settings tab.
Values:
Port Status
Primary SMTP Gateway
SMTP Port Number
E-Mail Send Authentication Displays the authentication method for outgoing e-mail.
E-Mail Server Settings
POP3 Server Address
POP3 Port Number
Reply Address
SMTP Server Connection
E-Mail List 1
Displays the PFS status.
Displays the IP address to connect to.
Displays the IP address to connect to.
Displays the status of the Non IPsec communication policy feature.
Displays the status of IEEE 802.1x.
Displays the setting of authentication method for IEEE 802.1x.
Displays the list of IP addresses that are permitted or denied access to the printer.
Displays the port status.
Displays the primary SMTP (Simple Mail Transfer Protocol) gateway.
Displays the SMTP port number.
Displays the POP3 (Post Office Protocol 3) server address.
Displays the POP3 port number.
Displays the IP address of servers connected with SMTP protocol when data is incoming.
Displays the status of the SMTP server connection.
Displays the acceptable e-mail addresses for the E-Mail Alert feature specified in E-mail List 1.