Dell 3130cn - Color Laser Printer User Manual page 139

Values:
Auto
Automatically performs color registration correction.
Correct
Prints a color registration chart. The color registration chart prints a lattice pattern of yellow, magenta, and
ColorRegi cyan lines. On the chart, find the values on the right side that are next to the straightest lines for each of
Chart the three colors. If the value for the straightest line is 0, color registration adjustment is not required. If the
value for the straightest line is any value other than 0, specify the adjustment values under Enter Number.
Y -9-+9
Enter
M -9-+9
Number
C -9-+9
Adjust Altitude
Purpose:
To specify the altitude of the location where the printer is installed.
The discharge phenomenon for charging the photo conductor varies with barometric pressure. Adjustments are performed
by specifying the altitude of the location where the printer is being used.
NOTICE: An incorrect altitude adjustment setting leads to poor printing quality, incorrect indication of remaining
toner, etc.
Values:
0m*
1000m
Specifies the altitude of the location where the printer is installed.
2000m
3000m
Init PrintMeter
Purpose:
To initialize the print meter of the printer. When the print meter is initialized, the meter count is reset to 0.
Reset Defaults
Purpose:
To initialize the NV (non-volatile) memory. After executing this function and rebooting the printer, all the menu
parameters, except the parameters for the network, are reset to their default values.
Clear Storage
Purpose:
To clear all files that are stored as Secure, Store, and Proof Print in the optional hard disk.
NOTE: The Clear Storage menu is only displayed when an optional hard disk is installed on your printer.
Format HDD
Purpose:
To initialize the optional hard disk.
Specifies the values that are found in the color registration chart for Yellow.
Specifies the values that are found in the color registration chart for Magenta.
Specifies the values that are found in the color registration chart for Cyan.