The Top And Side Margins Are Incorrect - Dell 3130cn - Color Laser Printer User Manual

2. After you replace the print cartridge, click Chart Print on
2
the Diagnosis tab.
3. Click the MQ Chart button.
The MQ Chart is printed.
Is the problem recovered?
Creased/stained paper
Action
Verify that the correct print media is being used. See
print media recommended for the printer.
1
Is the problem recovered?
Condensation inside the printer causes creased paper. Keep the printer turned on and leave it
more than one hour to get rid of the condensation. In winter, keep the printer turned on to
2
prevent condensation from forming. In this case, you can reduce power consumption by using
the energy-saving mode. If the problems still occur, contact Dell. See
Replace the fuser if you have a spare.
1. Replace the fuser. See
3
2. After you replace the fuser, test print your document again.
Is the problem recovered?
Jam/Alignment Problems
NOTE: Some of the following procedures that use the Tool Box can also be performed using the operator panel or
Dell Printer Configuration Web Tool. For information on how to use the operator panel and Dell Configuration Web
Tool, see "Understanding the Printer Menus"

The top and side margins are incorrect.

Action
"Replacing the Fuser".
and "Dell Printer Configuration Web
The task is complete.
"Supported Paper Sizes". If not, use the
"Contacting
Yes
Yes
The task
is
complete.
The task
is
complete.
Dell".
Contact
Dell.
Tool".
No
Contact
Dell.
No
If
printing
on an
envelope,
go to
action 2.
If
printing
on an
envelope,
go to
action 3.
Contact
Dell.