Dell 3130cn - Color Laser Printer User Manual page 39

Re-enter
Enter the password again.
Password
Status
Displays the status of NetWare.
Information
Active
SLP Select the check box to enable Active Discovery.
Discovery
1
* The following are illegal characters: semicolon (;), colon (:), asterisk (*), question mark (?), period (.), comma (,), yen mark (¥), back slash (\), double quotation ("), comparison symbols (< >), brackets ([ ]), operation symbols (+, =, or ~), pipe (|),
slash (/), and space ( ).
NOTE: The settings in the NetWare page will be valid only when NetWare or the printer is rebooted. Click the Apply new settings button to apply new settings.
NOTE: An optional network protocol adapter is required to display the NetWare page.
SMB
Purpose:
To configure detailed settings for SMB.
Values:
Host Name Specifies the host name up to 15 alphanumeric characters. The original setting will remain valid if no input is made.
Workgroup Specifies the workgroup name up to 15 alphanumeric characters. The original setting will remain valid if no input is made.
Administrator Name Specifies the administrator name up to 20 alphanumeric characters. The original setting will remain valid if no input is made. The default name is admin.
Administrator Password Specifies the administrator password up to 14 alphanumeric characters. The original setting will remain valid if no input is made. The default password is password.
Re-enter Administrator Password Allows you to confirm the configured administrator password by re-entering the same password.
Maximum Sessions Displays the maximum sessions.
On Notifies the host name and workgroup name in Unicode characters.
Unicode Support
Off Does not notify the host name and workgroup name in Unicode characters.
On Enable the Auto Master Mode.
Auto Master Mode
Off Disable the Auto Master Mode.
On Encrypts the password.
Encrypt Password
Off Does not encrypt the password.
Job Time-Out Sets the timeout period from 60 to 3600 seconds.
Connection Time-Out Sets the connection timeout period from 60 to 3600 seconds.
NOTE: The settings in the SMB page will be valid only when the printer is rebooted. Click the Apply new settings button and reboot the printer to apply new settings.
NOTE: An optional network protocol adapter is required to display the SMB page.
AppleTalk
Purpose:
To configure the detailed settings for AppleTalk.
Values:
Printer Specifies the printer name in the AppleTalk network up to 32 alphanumeric characters and symbol sets.
AppleTalk Zone Specifies the AppleTalk zone name up to 32 alphanumeric characters and symbol sets.
AppleTalk Type Displays the AppleTalk type.
Delay Start Time Specifies the delay start time between 1 and 255 seconds. A zero (0) value specifies no delay.
NOTE: An optional network protocol adapter is required to display the AppleTalk page.
E-Mail Alert
Purpose:
To configure detailed settings for E-Mail Alert. This page can also be displayed by clicking E-Mail Alert in the Left Frame.
Values: