Configure User Rights
Perform this procedure to configure the administrator-level and operator-level
passwords used to access the embedded web server interface through the
Username and Password Required dialog box.
To configure passwords:
1. At the Configure window, click the Security tab. The Security page displays
2. For the Administrator set of data fields:
Figure 41: Security page–User Rights tab
Edge Switch 2/24 Installation Guide
with the User Rights tab selected.
a. Type the administrator user name (as specified by the customer's network
administrator) in the New User Name field. Use 16 alphanumeric
characters or less.
b. Type the administrator password (as specified by the customer's network
administrator) in the New Password field. Use 16 alphanumeric
characters or less.
c. Type the administrator password again in the Confirm New Password
field, as shown in
Figure
41.
Using the Embedded Web Server
99