Set Director Date And Time - HP StorageWorks Director 2/140 Installation Manual

Installing and Configuring the Director
Figure 24: Hardware View page (with FRU failures)

Set Director Date and Time

The Director Element Manager log entries are stamped with the date and time
received from the director. Use these steps to set the effective date and time for the
director:
Note:
1. At the Hardware View, choose Configure > Date/Time. The Configure Date
2. Set director date and time manually, or set for periodic updates. For specific
64
The director and HAFM synchronize at least once daily.
and Time dialog box displays, as shown in
instructions, see the following sections:
Set Director Date and
Synchronize Date and
Figure
Time, page 64
Time, page 65
25.
Director 2/140 Installation Guide