HP 316095-B21 - StorageWorks Edge Switch 2/24 Installation Manual page 99

3. Click Activate to save the information. The message "Your changes to
Edge Switch 2/24 Installation Guide
c. Click the check box in the Write Authorization column to enable or
disable write authorization for the trap recipient (default is disabled). A
check mark in the box indicates write authorization is enabled. When the
feature is enabled, a management workstation user can change
sysContact, sysName, and sysLocation SNMP variables.
d. Type the IP address or DNS host name of the trap recipient (SNMP
management workstation) in the associated Trap Recipient field. Use 64
alphanumeric characters or less. It is recommended the IP address be
used.
e. The default user datagram protocol (UDP) port number for trap recipients
is 162. Type a decimal port number in the associated UDP Port Number
field to override the default.
the SNMP configuration have been successfully
activated" displays.
Using the Embedded Web Server
97