Port Properties Dialog Box - HP 316095-B21 - StorageWorks Edge Switch 2/24 Installation Manual

Installing and Configuring the Edge Switch 2/24
8. Double-click the port connector used to make this ISL connection to open the
Figure 29: Port Properties dialog box
9. Ensure the Link Incident field displays None and the Reason field is blank.
Note:
Threshold %) displays in the Port Properties dialog box. This field displays the active
congested threshold percentage currently configured in the Configure Open Trunking
dialog box.
76

Port Properties dialog box

If an ISL segmentation or other problem is indicated, refer to the
HP StorageWorks Edge Switch 2/24 Service Manual to isolate the problem. If
no problems are indicated, installation tasks are complete.
If the Open Trunking feature is installed an additional field (Congested
(Figure 29).
Edge Switch 2/24 Installation Guide