Power And System Error Leds; Edge Switch 2/24 Front Panel Features - HP 316095-B21 - StorageWorks Edge Switch 2/24 Installation Manual

Introduction
Figure 2
1
1
2
3
Figure 2: Edge Switch 2/24 front panel features

Power and System Error LEDs

The PWR LED, as shown in
facility AC power and powered on. If the LED extinguishes, a facility power
source, power cord, or power distribution failure is indicated.
The ERR LED, as shown in
requiring immediate operator attention, such as a FRU failure. The LED remains
illuminated as long as an event is active. The LED extinguishes when the Clear
System Error Light function is selected from the Product Manager application.
The LED blinks if unit beaconing is enabled. An illuminated LED (indicating a
failure) takes precedence over unit beaconing. The LED also blinks (at twice the
beaconing rate) when the IML/RESET button is pressed and held for more than
three seconds.
20
shows the front panel controls, connectors and indicators.
3
2
Power LED (green)
Error LED (amber
Ethernet LAN connector
4
5
6
Initial machine load (IML) button
4
SFP fiber optic connectors
5
Port LEDs
6
Figure 2, illuminates when the switch is connected to
Figure 2, illuminates when the switch detects an event
Edge Switch 2/24 Installation Guide