Command Line Interface - HP 316095-B21 - StorageWorks Edge Switch 2/24 Installation Manual

Introduction
Refer to the HAFM server installation guide and the HP StorageWorks High
Availability-Fabric Manager User Guide for more information.

Command Line Interface

The command line interface (CLI) allows you to access many HAFM and Product
Manager functions while entering commands during a Telnet session with the
switch.The primary purpose of the CLI is to automate management of a large
number of switches using scripts. The CLI is not an interactive interface; no
checking is done for pre-existing conditions and no prompts display to guide users
through tasks.
Refer to HP StorageWorks CLI Reference Guide for Directors and Edge Switches
for more information.
28
Unix workstation with color monitor, keyboard, and mouse, using a:
— Hewlett-Packard HA PA-RISC
clock speed, using the HP-UX
®
— Sun Microsystems UltraSPARC™ II processor with a 400 MHz or
greater clock speed, using the SunOS™ Version 5.5.1 or higher operating
system, or Solaris™ Version 2.5.1 or higher operating system.
®
— IBM PowerPC
or POWER3™ microprocessor with a 400 MHz or greater clock speed,
using the AIX Version 4.3.3 or higher operating system.
At least 15 MB available on the internal hard drive.
128 MB or greater RAM.
Video card supporting 256 colors at 800 x 600 pixel resolution.
Ethernet network adapter.
Java-enabled Internet browser, such as Microsoft Internet Explorer (Version
4.0 or later) or Netscape Navigator
®
processor with a 400 MHz or greater
®
11 or higher operating system.
microprocessor with a 400 MHz or greater clock speed,
®
(Version 4.6 or later).
Edge Switch 2/24 Installation Guide