Using the Embedded Web Server
Configure Date and Time
Perform this procedure to configure the effective date and time for the switch. To
set the date and time:
1. At the Configure window, click the Switch tab, then select Date/Time tab.
Figure 35: Switch page—Date/Time tab
2. Click Activate to save the information. The message "Your changes to
88
The Switch page displays with Date/Time tab selected (highlighted red), as
shown in
Figure
35.
a. Click the Date fields that require change, and type numbers in the
following ranges:
Month (MM): 1 through 12
Day (DD): 1 through 31
Year (YY): greater than 1980
b. Click the Time fields that require change, and type numbers in the
following ranges:
Hour (HH): 0 through 23
Minute (MM): 0 through 59
Second (SS): 0 through 59
the date/time configuration have been successfully
activated" displays.
Edge Switch 2/24 Installation Guide