Management Ethernet Port Leds; Qsfp+ Port Leds; Power Supply Leds - HP FlexFabric 7900 Series Installation Manual

Table 26 LPU status LED description
LED
SLOT

Management Ethernet port LEDs

A management Ethernet port has one LINK LED and one ACT LED to show its link and data transmission
status.
Table 27 Management Ethernet port LED description
Status
LINK
Steady green
Steady green
Off

QSFP+ port LEDs

Each QSFP+ port has a status LED to show port operating status and activities.
Table 28 QSFP+ port LED description
LED
QSFP+ port LED

Power supply LEDs

A power supply status LED shows how the hot swappable power supply in a slot is operating.
Status
Steady green
Flashing green
Flashing red
Off
Description
ACT
A link is present, and the management Ethernet port is receiving or
Flashing green
sending data.
Off A link is present.
Off No link is present.
Status
Steady green
Flashing green
Steady yellow
Flashing yellow
Off
Description
The LPU is starting.
The LPU is operating correctly.
The LPU is faulty.
The LPU is powered off.
Description
A transceiver module or cable has been correctly installed.
The port has a link and is operating at 40 Gbps.
The port is sending or receiving data at 40 Gbps.
A transceiver module or cable has been correctly installed.
The port has a link and is operating at 10 Gbps.
The port is sending or receiving data at 10 Gbps.
No transceiver module or cable has been installed or no
link is present on the port.
51