Configure Identification Dialog Box - HP 316095-B21 - StorageWorks Edge Switch 2/24 Installation Manual

HAFM Server Setup and Configuration
Figure 30: Configure Identification dialog box
3. Replace the default text with the following entries:
4. Click Activate.
5. On the menu bar, select Maintenance > Enable Call Home Notification.
6. Place a check mark in the Enable Call Home Event Notification option.
7. See
56
Name - Enter a name for this Director or Edge Switch as appropriate for
your SAN. Click Set Name As Nickname, which will display a check
mark in the box. This will be the name that will be displayed with the icon
for this Director or Edge Switch in the HAFM Product View and Fabric
View displays.
Description - Enter the address of your installation.
Location - Enter the WFM Site ID and Super Region code, as obtained
in "Obtaining Required
a "~" character, as shown in the following example:
US1234567890~AA
Contact - Enter the contact name, phone number, and company name
exactly as provided to HP in
page 46, separated by "~" (tilde) characters, as follows:
FirstName~LastName~PhoneNumber~CompanyName
For example:
Joe~Smith~5085551515~ABCCompany
The Configure Identification dialog box closes and the Product Manager
window at the Hardware View for this device is still displayed.
"Testing Remote
call-home feature.
Information" on page 46. Separate each item with
"Obtaining Required
Notification" on page 61 for instructions on testing the
HAFM Server for Windows 2000 Installation Guide
Information" on