Replacing The Battery - Intel SBXD62 - Server Compute Blade Installation And User Manual

5. Install the small-form-factor expansion card, as shown in the following illustration.
a. Orient the expansion card.
b. Slide the notch in the narrow end of the card into the raised hook on the tray; then,
gently pivot the card into the expansion card connectors.
For device-driver and configuration information needed to complete the installation of the
expansion card, see the documentation that comes with the expansion card.
3. If you have other options to install or remove, do so now; otherwise, go to
"Completing the Installation" on page

Replacing the Battery

The lithium battery must be handled correctly to avoid possible danger. If you replace the
battery, you must adhere to the following instructions.
If you replace the original lithium battery with a heavy-metal battery or a battery with
heavy-metal components, be aware of the following environmental consideration.
Batteries and accumulators that contain heavy metals must not be disposed of with normal
domestic waste. They will be taken back free of charge by the manufacturer, distributor, or
representative, to be recycled or disposed of in a proper manner.
Note: After you replace the battery, you must reconfigure your blade server and reset the system
date and time.
Caution: When replacing the lithium battery, use only an equivalent type battery recommended by
the manufacturer. If your system has a module containing a lithium battery, replace it only
with the same module type made by the same manufacturer. The battery contains lithium
and can explode if not properly used, handled, or disposed of.
28
Expansion
card
30.
Intel® Server Compute Blade SBXD62 Installation and User's Guide