Intel SBXD62 - Server Compute Blade Installation And User Manual page 48

— CPU Options
— PCI Bus Control
— Baseboard Management Controller (BMC) Settings
•
Save Settings
Select this choice to save the changes you have made in the settings.
•
Restore Settings
Select this choice to cancel the changes you have made in the settings and restore the
previous settings.
•
Load Default Settings
Select this choice to cancel the changes you have made in the settings and restore the
factory settings.
•
Exit Setup
Select this choice to exit from the Configuration/Setup Utility program. If you have
not saved the changes you have made in the settings, you are asked whether you want
to save the changes or exit without saving them.
38
special requirements described in
the Memory Configuration to Flat to disable memory mirroring and sparing.
Select this choice to disable the microprocessor cache or to set the microprocessor
cache to use the write-back or the write-through method. Write-back caching
generally provides better system performance.
You can also select this choice to enable or disable hyper-threading and adjust
microprocessor performance settings. If enabled, hyper-threading will only be
active if it is supported by your operating system.
Select this choice to view and set interrupts for PCI devices and to configure the
master-latency-timer value for the blade server.
Select this choice to enable or disable the Reboot on System NMI option on the
menu. If you enable this option, the blade server will automatically restart 60
seconds after the service processor issues a nonmaskable interrupt (NMI) to the
blade server. You can also select this choice to enable or disable and set the time-
outs for the POST and OS loader watchdog timers and view BMC version
information.
^ BMC Network Configuration
Select this choice to set the network addresses of the BMC.
^ BMC System Event Log
Select this choice to view and clear BMC event log entries.
Intel® Server Compute Blade SBXD62 Installation and User's Guide
"Installing Memory Modules" on page 21. Set