Configuration/Setup Utility Menu Choices - Intel SBXD62 - Server Compute Blade Installation And User Manual

Configuration/Setup Utility Menu Choices

The following choices are on the Configuration/Setup Utility main menu. Depending on
the version of the BIOS code in the blade server, some menu choices might differ slightly
from these descriptions.
•
System Summary
Select this choice to display configuration information, including the type, speed, and
cache sizes of the microprocessors and the amount of installed memory. When you
make configuration changes through other options in the Configuration/Setup Utility
program, the changes are reflected in the system summary; you cannot change
settings directly in the system summary.
— Processor Summary
— USB Device Summary
•
System Information
Select this choice to display information about the blade server. When you make
configuration changes through other options in the Configuration/Setup Utility
program, some of those changes are reflected in the system information; you cannot
change settings directly in the system information.
— Product Data
•
Devices and I/O Ports
Select this choice to view or change assignments for devices and input/output (I/O)
ports.
You can also enable or disable the integrated SAS and Ethernet controllers, all
standard ports (such as serial), and the I/O-expansion card. Enable is the default
setting for all controllers. If you disable a device, it cannot be configured, and the
operating system will not be able to detect it (this is equivalent to disconnecting the
device). If you disable the Ethernet controller, the blade server will have no Ethernet
capability.
— Remote Console Redirection
— Video
— System MAC Addresses
36
Select this choice to view information about the microprocessors installed in the
blade server.
Select this choice to view information about the USB devices installed in the
blade server.
Select this choice to view the machine type and model of the blade server, the
serial number, and the revision level or issue date of the BIOS and diagnostics
code stored in electrically erasable programmable ROM (EEPROM).
Select this choice to enable Serial over LAN (SOL) and to set remote console
communication parameters.
Select this choice to view information about the integrated video controller.
Select this choice to set and view the MAC addresses for the Ethernet controllers
on the blade server.
Intel® Server Compute Blade SBXD62 Installation and User's Guide