Completing The Installation - Intel SBXD62 - Server Compute Blade Installation And User Manual

7. Insert the new battery:
a. Tilt the battery so that you can insert it into the socket.
b. As you slide the battery into place, press the battery down into the socket.
3. Close the blade server cover (see
Important: Hazardous energy is present when the blade server is connected to the power source.
Always replace the blade cover before installing the blade server.
4. Reinsert the blade server into the bay in the Intel® Blade Server Chassis SBCE.
5. Turn on the blade server.
6. Start the blade server Configuration/Setup Utility program and set configuration
parameters as needed (see
page 35

Completing the Installation

To complete the installation, complete the following tasks. Instructions for each task are in
the following sections.
1. Reinstall the blade server bezel assembly, if you removed it (see
Server Bezel Assembly" on page 19
2. Close the blade server cover, unless you installed an optional expansion unit (see
"Closing the Blade Server Cover" on page
Important: Hazardous energy is present when the blade server is connected to the power source.
Always replace the blade cover before installing the blade server.
3. Reinstall the blade server into the Intel® Blade Server Chassis SBCE (see
the Blade Server in an Intel® Blade Server Chassis SBCE" on page
4. Turn on the blade server (see
5. For certain options, run the blade server Configuration/Setup Utility program (see
"Updating the Blade Server Configuration" on page
Note: If you have just connected the power cords of the Intel® Blade Server Chassis
30
"Using the Configuration/Setup Utility program" on
for information).
"Turning on the Blade Server" on page
SBCE to electrical outlets, you must wait until the power-on LED on the
blade server flashes slowly before pressing the power-control button.
Intel® Server Compute Blade SBXD62 Installation and User's Guide
"Closing the Blade Server Cover" on page
for information on installing the bezel assembly).
31).
33).
31).
"Removing the Blade
"Installing
32).
7).