Intel SBXD62 - Server Compute Blade Installation And User Manual page 39

Do not:
•
Throw or immerse into water
•
Heat to more than 100°C (212°F)
•
Repair or disassemble
Dispose of the battery as required by local ordinances or regulations.
Complete the following steps to replace the battery:
1. Read the safety information beginning on
Information"
2. Follow any special handling and installation instructions that come with the battery.
3. Turn off the blade server and remove it from the Intel® Blade Server Chassis SBCE
(see
page 32
4. Open the blade server cover (see
instructions).
5. Locate the battery on the system board.
6. To remove the battery, use your finger to press the battery down on one side of the
battery; then slide the battery from the socket. A spring mechanism will push the
battery out towards you as you slide it from the socket.
Intel® Server Compute Blade SBXD62 Installation and User's Guide
and "Installation Guidelines" on page
"Installing the Blade Server in an Intel® Blade Server Chassis SBCE" on
for instructions).
page 65 in Appendix C, "Safety
15.
"Opening the Blade Server Cover" on page 18
Battery
for
29