Table of Contents
Advertisement
Network Connection Problems
Symptom
One or more blade servers
are unable to
communicate with the
network.
Option Problems
Symptom
An option that was just
installed does not work.
An option that used to
work does not work now.
Intel® Server Compute Blade SBXD62 Installation and User's Guide
Make sure that:
•
The I/O-modules for the network interface that you are using are installed in
the correct bays and are configured and operating correctly. See the Intel®
Blade Server Chassis SBCE Hardware Maintenance Manual and
Troubleshooting Guide on the Resource CD that came with your Intel®
Blade Server Chassis SBCE for details.
•
The settings in the switch module are correct for the blade server (settings
in the switch module are blade server specific).
If you installed an optional expansion card, make sure that:
•
The expansion card is designed for the server. See the Intel
Compute Blade SBXD62 Tested Hardware and Operating System List
located on http://support.intel.com for a list of compatible hardware.
•
You followed the installation instructions that come with the expansion card.
•
The option is installed correctly.
•
You have not loosened any other installed options or cables.
•
You updated the configuration information in the Configuration/Setup Utility
program. Whenever memory or an option is changed, you must update the
configuration.
If the problem remains, call for service.
Make sure that:
•
The option is designed for the blade server.
•
You followed the installation instructions that come with the option.
•
The option is installed correctly.
•
You have not loosened any other installed options or cables.
If the problem remains, call for service.
Make sure that all of the option hardware and cable connections are secure.
If the option comes with its own test instructions, use those instructions to test
the option.
If the problem remains, call for service.
Suggested action
Suggested action
®
Server
49
Advertisement
Table of Contents
