Table 8. Usb Configuration Details - Intel MFS5520VI - Multi-Flex Server Compute Module User Manual

The following table describes the features of the Advanced USB Configuration screen

Table 8. USB Configuration Details

PCI Configuration
The PCI Configuration Screen allows you to configure the memory usage and on-board
NIC controllers.
70
Setup Item Options
Detected USB
Devices
USB Controller Enabled
Disabled
Legacy USB Enabled
Support
Disabled
Auto
Port 60/64 Enabled
Emulation
Disabled
Make USB Enabled
Devices Non-
Disabled
Bootable
Device Reset 10 sec
time-out
20 sec
30 sec
40 sec
USB 2.0 Enabled
controller
Disabled
Description
Information only. Displays the number and
general description of USB devices detected for
the compute module.
By default, the USB Controller is enabled. When
enabled, all on-board USB controllers are turned
on and accessible by the OS. If disabled all on-
board USB controllers are turned off and
inaccessible by the OS.
If disabled, the remaining configuration options on
this screen are grayed out.
USB device boot support and PS/2 emulation for
USB keyboard and USB mouse devices.
If auto is selected, Legacy USB support is
enabled if a USB device is attached
I/O port 60h/64h emulation support.
NOTE: This may be needed for legacy USB
keyboard support when using an OS that
is USB unaware.
Exclude USB in Boot Table.
If enabled, this will remove all USB Mass Storage
devices as Boot options.
If disabled, this allows all USB Mass Storage
devices as Boot options.
USB Mass Storage device start unit command
time-out.
Setting to a larger value provides more time for a
mass storage device to be ready, if needed.
When enabled on-board USB ports are enabled
to support USB 2.0 mode.
Contact your OS vendor regarding OS support of
this feature.
®
Intel Compute Module MFS5520VI User Guide