Intel MFS5520VI - Multi-Flex Server Compute Module User Manual page 48

•
The memory slots of each DDR3 channel from the Intel
series or Intel
This holds true even for the Independent Channel mode. Therefore, if A1 is empty, A2
cannot be populated or used.
•
The BIOS selects the Independent Channel mode by default, which enables all
installed memory on all channels simultaneously.
•
Mirrored Channel mode is not available when only one processor is populated (CPU
Socket 1).
•
If both processor sockets are populated and the installed DIMMs are associated with
both processor sockets, then a given RAS mode is selected only if both the processor
sockets are populated to conform to that mode.
•
The minimum memory population possible is one DIMM in slot A1. In this
configuration, the compute module operates in the Independent Channel mode; RAS
is not available.
•
If both processor sockets are populated, the next upgrade from the Single Channel
mode installs DIMM_D1. This configuration results in an optimal memory thermal
spread, as well as Non-Uniform Memory Architecture (NUMA) aware interleaving.
The BIOS selects the Independent Channel mode of operation.
•
If only one processor socket is populated, the next upgrade from the Single Channel
mode is installing DIMM_B1 to allow channel interleaving. The compute module
operates in the Independent Channel mode.
•
If an installed DDR3 DIMM has faulty or incompatible SPD data, it is ignored during
memory initialization and is (essentially) disabled by the BIOS. If a DDR3 DIMM has
no SPD data or is missing SPD information, the slot in which it is placed is treated as
empty by the BIOS.
•
The DIMM parameter matching requirements for memory RAS is local to a socket.
For example, while Channels A/B/C can have one match of timing, technology, and
size, Channels D/E/F can have a different set of parameters and RAS still functions.
•
DDR3 DIMMs on adjacent slots on the same channel do not need to be identical.
•
For the Mirrored Channel mode, the memory in Channels A and B of Socket 1 must
be identical and Channel C should be empty. Similarly, the memory in Channels D
and E of Socket 2 must be identical and Channel F should be empty.
— The minimum population upgrade for the Mirrored Channel mode is DIMM_A1,
— If Mirrored Channel mode is selected and the third channel of each processor
34
® ®
Xeon Processor 5600 series are populated on a farthest first fashion.
DIMM_B1, DIMM_D1, and DIMM_E1 with both processor sockets populated.
DIMM_A1 and DIMM_B1 as a pair must be identical, and so must DIMM_D1
and DIMM_E1, but the DIMMs on different processor sockets do not need to be
identical. Failing to comply with these rules results in a switch back to the
Independent Channel mode.
socket is not empty, the BIOS disables the memory in the third channel of each
processor socket.
® ®
Xeon
®
Intel Compute Module MFS5520VI User Guide
processor 5500