Table 2. Configuration Jumper Description
Jumper Name
J9B9: BIOS
Recover
J9A3: Password
Clear
J9A4: CMOS
Clear
J9A5: BMC Force
Update
6
Pins
1-2
These pins should have a jumper in place for normal operation.
(Default)
2-3
If these pins are jumpered, the compute module boots from the
emergency BIOS image. These pins should not be jumpered for
normal operation.
1-2
These pins should have a jumper in place for normal operation
(Default)
2-3
If these pins are jumpered, administrator and user passwords are
cleared immediately. These pins should not be jumpered for normal
operation.
1-2
These pins should have a jumper in place for normal operation.
(Default)
2-3
If these pins are jumpered, the CMOS settings are cleared
immediately. These pins should not be jumpered for normal
operation.
To clear the CMOS, you must only momentarily move the jumper to
position 2-3 . You must then move the jumper back to the default
position 1-2 and reinstall the compute module into the chassis.
1-2
BMC Firmware Force Update Mode - Disabled (Default)
2-3
BMC Firmware Force Update Mode - Enabled
What happens at reset...
®
Intel
Compute Module MFS5520VI User Guide