Figure 19. Removing The Heatsink - Intel MFS5520VI - Multi-Flex Server Compute Module User Manual

Removing the Heatsink
5. Loosen the four captive screws on the heatsink corners in a diagonal manner
according to the numbers shown in
a. Starting with the screw at location 1, loosen it by giving it two rotations in the
b. Proceed to the screw at location 2 and loosen it by giving it two rotations and
c. Loosen screws at locations 3 and 4 by giving each screw two rotations and then
d. Repeat steps 5a through 5c by giving each screw two rotations each time until
6. Twist the heatsink slightly to break the seal between the heatsink and the processor.
7. Lift the heatsink from the processor (see letter "B" in
up easily, twist the heatsink again. Do not force the heatsink from the processor.
Doing so could damage the processor.
Removing the Old Processor
8. Push the lever handle down and away from the socket to release it (see letter "A" in
Figure
9. Rotate the lever open all the way (see letter "B" in
26
anticlockwise direction (see letter "A" in
Do not fully loosen.)
stop.
stop.
all screws are loosened.
2
TIM

Figure 19. Removing the Heatsink

20).
Figure 19 as follows:
Figure 19) and stop. (IMPORTANT:
Figure
B
3
A
1
4
AF003123
Figure 20).
®
Intel Compute Module MFS5520VI User Guide
19). If it does not pull