Figure 41. Removing Standoffs - Intel MFS5520VI - Multi-Flex Server Compute Module User Manual

7. Using a 1/4-inch nut driver, remove the standoffs (see
8. Using a Phillips* screwdriver, secure the four screws (that were previously
removed) into the holes vacated by the standoffs.
9. Reinstall the top cover. For instructions, see
10. Reinstall the server compute module in the chassis. For instructions, see
a Compute Module into the Chassis" on page
48
1
I/ O
2
1
2
ID

Figure 41. Removing Standoffs

Intel
Figure 41).
"Installing the Top Cover" on page
14.
®
Compute Module MFS5520VI User Guide
AF003093
16.
"Installing